Safety valve manufacturer

Safety Relief Valve 


"HP" Safety Relief Valve represent the most advance technology in value designed for use in intermediate power boiler and organic fluid vaporizer service.
Built in conformance to section I of the ASME boiler and pressure vessel code, all capacities am certified by the national board of boiler and pressure vessel inspector at 5% over pressure.





"HP" Designed by Safety Relief Valve with Full Nozzle & hardened disc to minimize maintenance and increase seat life.

Open bonnet and Close bonnet both design have maximum set pressure 75 bar in Relief Valves.

This product is Manufacturer in our Workshop under ISO 9001 approved facility and meets all of the necessary requirements of ASME Code Section I.







  • MANUFACTURING STANDERD : API – 526
  • TESTED AS PER : API 527
  • ENDS FLANGED (DRILLED & UNDRILLED) AS PER ANSI B 16.5 CLASS – 150 R.F.
  • BODY HYDROSTATIC TEST PRESSURE TWICE THE SET PRESSURE
  • SET PRESSURE 1 Kg/cm2 TO 21 Kg/cm2
  • TEMPERATURE – 425oC
  • IBR APPROVED WITH DISCHARGE CAPACITY CONSTANT OF ‘24’
  • ACCURATE SPRING DESIGNS TO ACHIEVE BLOW DOWN WITHIN 5% WHICH SAVES WASTAGE OF STEAM.
  • SOFT SEATED SAFETY RELIEF VALVES ARE USED FOR LOW TEMPRATURE AND CRITICAL APPLICATION






For Steam - Air - Gas - Liquid : AGH200


PRESSURE SETTINGS: 15-500 PSI
These high pressure safety valves combine extra sturdy construction, a patented* three-piece disc including seat seal of Teflon, and finely adjustable blow down control-resulting in long service life with superior seat tightness at operating pressure
APPLICATION : Multi-stage compressor intercoolers and after coolers, Receivers 
Especially recommended for thermal expansion relief and/or full rated capacity discharge. When equipped with S/S springs, or all stainless steel assemblies, for low temperature-cryogenic- installations.

Comments

Post a Comment